Rail Koonin

Rail Koonin

Toronto based sideman bass player to many projects, Rail Koonin recently visited Nice Rack Canad to take his pedalboard to a more professional level.

When you've spent thousands of hours practicing to be the best player you can, do you want your gear to hold you back from achieving your fullest potential? Of course not, so do what the pro's do, call upon Nice Rack Canada to take your gear to the next level.

Drive On

Drive On

Nice Rack Canad recently built this series wired pedal board system for a local player who really loves a nice overdrive.

Metric Movement

Metric Movement

We designed 2x "Single" carts for Keyboards with a Dave Smith Instrument synth per. Each with a lower deck for pedalboards and loom cabling to reside during transport.

We also designed a "Double" keyboard cart for singer Emily Haines, "90 Degree" array of Nord Keyboard & Sequential Circuits Pro One. The cart has to roll up and down a 31" wide ramp for changeovers & load ins, so the cart has to remain in it's "Straight" position for the logistics and then articulate into it's "Right Angle" stage configuration.

Metric Control

Metric Control

Our clients, Metric are gearing up for another touring cycle. Guitarist Jimmy Shaw is a gear enthusiast and always wants to deliver the best concert performances possible using the most powerful technology available at the moment.

Hence the addition of the RJM Musi MasterMind GT being the next logical step to improve upon the rig we built for him in 2013.

Mini Mooger Foogers

Mini Mooger Foogers

Since 1953 Moog Music Inc. has been manufacturing some of the most iconic electronic tools for musicians that have graced thousands of recordings & stages.

When Moog’s Canadian Distributor, SF Marketing asked Nice Rack Canada to build them a demo pedalboard for the new line of Mini Mooger Fooger Effects Pedals, we were honoured!

4CM Series Wired Pedalboard

4CM Series Wired Pedalboard

For rental amp situations where there may not be an effects loop on the amp we built in some functionality that helps the player flex with the hardware available at the moment. There is a 4CM vs Series wiring switch in the latching connection In & Out box. When the Switch is in the "4CM" position, Delay & Reverb are placed in the signal chain after the pre-amp stage of the amplifier.

When in "Series" mode the Amp's Effects Loop is disconnected from the signal path and the Output of the Delay & Reverb is routed to the input of the Amplifier.

Stone River | Jeff Desilets

Stone River | Jeff Desilets

Vintage Rock n Roll Guitar Tones with Modern Convenience.

Previously Jeff had been doing a tap dance on his old pedalboard during gigs. With the nuanced 3 guitar interplay in the band Jeff wanted to focus more on performance than on operations.

This rack system incorporates some of the best routing & control tools with some of the best effects devices available to today's guitarist. The system is a series wired system switched through a RJM Music . Effects Gizmo, controlled by a Custom Audio Electronics RS-T MIDI Controller.

Eventide H9 Max

Eventide H9 Max

Nice Rack Canada was able to help a couple of our clients secure 1 each of the 99 piece limited run of Eventide H9 MAX Gold that were unveiled last week.

Let's Get Loud Again

Let's Get Loud Again

About 2 years ago we built a pedalboard for a client who wanted a tribute to Jack White.

We recently had the board visit the shop for an update. We replaced the MXR Micro Amp with a rehoused Black Cat Pedals Bumble Bee Fuzz and Momentary Breaker Switch added.

Working Man

Working Man

A working man's pedalboard - the perfect little tone palette for the pro sideman player.

Small footprint with a ton of great sounds accessible via MIDI from the Eventide H9 & TC Electronic Nova Drive. These tools help a player cover a variety of sonic bases with forward flexibility for the next gig.

Infinity Rack System

Infinity Rack System

Here's some spec's on this sweet system. It's a "Matrix" system, meaning that it has the ability to change all of it's routings on every preset.

Instead of being tied to one signal flow you can have any signal flow you want, when you want. Which is pretty handy for a score music composer & guitar instrumental musician who has to constantly change the signal flow.

The switcher has a software interface that allows you to create an icon for each device and it's corresponding Input(s) & Output(s), then using the mouse, connect the rig you want to have at that moment with no extra devices connected to the signal path for the cleanest path possible from pick ups to speakers.

The Great Canadian Stompbox Show

The Great Canadian Stompbox Show

The Great Canadian Stompbox Show presented by Nice Rack Canada.

Saturday September 27th, 11:00 AM - 6:00 PM at the Nice Rack Canada Showroom, 262 Carlaw Avenue, Suite 110-B, Toronto, Ontario.

This event will provide players with a unique chance to interact with the brands & builders outside the normal retail environment. Vendors include EventideTribute Audio DesignsSolidGoldFXJonny Rock GearPlant 4 Thermionic DesignsTC ElectronicOutlaw EffectsMoog Music & T-Rex Effects.

Matrix Pedalboard System

Matrix Pedalboard System

A Matrix Switching Double Pedalboard System with almost infinite tone possibilities.

The audio matrix can store 120 different signal routings with 3 millisecond switching time between routings. The Eventide TimeFactor stores 100 different delay presets. The 2x Eventide H9's can host 99 presets per unit from across the Eventide algorithm collection with the TC Electronic Nova Drive providing 18 different OD's & Distortions. With a system like this, the only limitations on sonic possibilities are the player's creativity.

California Breed | Andrew Watt

California Breed | Andrew Watt

New pedalboard for California Breed guitarist, Andrew Watt. 

The system is built upon a lightweight, super strong & sharp looking Custom District perforated aluminum deck.

Powered by Custom Audio Electronics / MXR MC403.

System Design & Fabrication by Nice Rack Canada.

California Breed | Glenn Hughes

California Breed | Glenn Hughes

New pedalboard for rock legend, Glenn Hughes.

We recently shipped out this compact series wired pedalboard system in time for the debut gigs for California Breed, Glenn Hughes' new power trio with Jason Bonham on Drums & Andrew Watt on Guitar.

Kim Churchill

Kim Churchill

Series Wired Pedalboard for Australian recording artist, Kim Churchill. 3 Parallel Signal Paths for Magnetic Pickup, Piezo Pickup and Harmonica Mic.

Aside from stellar sonics & player ergonomics, the primary criteria for this design was weight for checked luggage considerations.

To beat the overweight grief at the airport, we did the build in a manner that allows for easy removal & reinstallation of the 6 Channel DI Box to quickly shed 7lbs to bring the weight in under the limit.

Every build we do is reflective of the client's unique criteria for ergonomics, sonics & transport logistics. Tell us your story and we'll build a rig to suit you. 

Ladies of The Canyon | Anna Ruddick

Ladies of The Canyon | Anna Ruddick

An compact pedalboard with a tonne of tone for Ladies of the Canyon Bassist, Anna Ruddick.

99 Different Effects, Clean Boost, Compressor & a Tuner in a Pedalboard system small enough to fit through a carryon luggage sizer.

Alli Walker | Eric Paul

Alli Walker | Eric Paul

We recently built this pedalboard for Toronto Country Music Guitarist Eric Paul, a sideman to singer Alli Walker.

Mars Hotel

Mars Hotel

A series wired pedalboard built for Toronto based Grateful Dead tribute band Mars Hotel. guitarist Mark Arbus.

Mark came to us in a panic a few days before a gig. He'd made the mistake of hiring a part time rig builder who offered the sweetness of low price, and the bitterness of failure...